PRODUCTS
Beamforming ICs

PRODUCTS Beamforming ICs

Beamforming ICs

iCana’s Beamforming ICs are highly integrated cost-effective solutions that deliver high EIRP, which are key enablers for establishing a high data rate communication link at mmWave frequencies. The Beamforming ICs offer industry-leading performance, comprising multiple channels with independent control for each channel in both transmit and receive paths with high tunability and reconfigurability, allowing for optimal configuration of the antenna phased array for the best steering solution. This performance is guaranteed for every Beamforming IC across various operating conditions, thanks to the built-in different digital control circuitry and a large on-chip memory supporting the entire sensor interface monitoring temperature, RF power, and power consumption.

Part Number Frequency Range [GHz] Band EVAL Board Availability
ICAMB2427-A 24.25 - 27.5 n258 Contact Us
ICAMB2629-A 26.5 - 29.5 n257, n261 Contact Us
ICAMB3743-A 37.0 - 42.5 n259, n260 Contact Us

Key Features

  • 8 channels, dual polarization
  • High output power: 10 dBm per channel at 3% EVM (5G NR 400 MHz, 64 QAM)
  • Wide signal bandwidth up to 800 MHz
  • Channel gain range of 7 dB with 0.5 dB step
  • Common gain range of 20 dB with 1 dB step
  • 6-bit phase resolution (5.6˚ phase step)
  • Low noise figure < 4.5 dB
  • Industry-leading phase accuracy: RMS phase error < 2˚
  • Fast beam switching
  • Automatic temperature compensation for amplitude and phase
  • Self-calibration to reduce array level calibration and improve line yield
  • 4.6×5.1 mm² 90-pin BGA package
ICAMB2629-A
ICAMB2629-A block diagram